amigo
Full Member
Posts: 30
|
Post by amigo on Jun 3, 2018 17:52:15 GMT
Could you please make a video showing how pass-thru function works in v-box. thank you.
|
|
|
Post by WECON Support on Jun 4, 2018 2:11:57 GMT
i think we would prepare a manual. So far it is still the test version.
|
|
|
Post by WECON Support on Jun 4, 2018 2:14:46 GMT
mega.nz/#!eItQRRTL!M8klVHKk8cNrk3IdZ6uQ6R9gOQs4hA_nXRDU4aIfnT4
|
|
amigo
Full Member
Posts: 30
|
Post by amigo on Jun 4, 2018 3:13:34 GMT
What software is used for Step1? to start the virtual com port on the PC
Many virtual com port software I have seen, require remote IP address and Listening port of the remote device, is this required? If yes, how do we find out the remote IP address of v-box and the listening port?
|
|
|
Post by daniel7 on Jun 4, 2018 8:47:27 GMT
you don't need to use other virtual serial port tool, because if you choose the com number in step 1, it will create one by itself. in step 2, you can choose it. attention: if in step 2, the virtual serial port can't be regonized, please restart the computer, because it's the first time to install this virtual serial port. don't use the same com port name, such as, your computer has a COM3 USB serial port, so don't use COM3 in step 1.
|
|
amigo
Full Member
Posts: 30
|
Post by amigo on Jun 4, 2018 13:35:02 GMT
Sorry, I don't understand. For step1, you don't explain what software is used to create the virtual serial com port? Your picture is in chinese, so I can not read/understand it. What software is it? Thank you
|
|
|
Post by WECON Support on Jun 5, 2018 2:35:08 GMT
do you install a software called V-BOX on your pc? we can't do it over browser. If you have installed the v-box software on your pc, the virtual com port is created by V-box as long as you operate as the manual. but as i said, it is still test version, so you can not download it from wecon official web site.
|
|
amigo
Full Member
Posts: 30
|
Post by amigo on Jun 5, 2018 2:58:49 GMT
Thanks, that is what was not mentioned, is the software needed is v-box software. I do have the v-box software, but I have to install it on other PC that was not used to setup v-box. Will try it.
|
|
|
Post by daniel7 on Jun 5, 2018 8:25:22 GMT
So far, If customer want to use V-box passthrough, please the PC software, link is :https://drive.google.com/open?id=14FNpQsQGen49nAW9tqzTRcOPEmC8WaLd
|
|
amigo
Full Member
Posts: 30
|
Post by amigo on Jun 5, 2018 17:35:40 GMT
Does Wecon have any plans to allow pass-through for Ethernet based protocols? Basically a VPN connection via v-box?
|
|
|
Post by ting on Jun 6, 2018 6:30:25 GMT
Does Wecon have any plans to allow pass-through for Ethernet based protocols? Basically a VPN connection via v-box? Hello, yes,in fact it is in our schedules. Now R&D department is developing this funcdtion. We plan release this function in middle of June.
|
|
amigo
Full Member
Posts: 30
|
Post by amigo on Jun 6, 2018 20:51:25 GMT
Thank you, that is great news. Please let us know as soon as it is ready for testing.
|
|
|
Post by daniel7 on Jun 7, 2018 6:12:57 GMT
you are welcome, may I have your email or skype so that we can inform you in time? my email is support@we-con.com.cn
|
|
amigo
Full Member
Posts: 30
|
Post by amigo on Jun 7, 2018 12:57:21 GMT
sure, email is in my profile, visible to staff.
|
|
|
Post by daniel7 on Jun 8, 2018 8:01:29 GMT
ok, you can also send mail to me
|
|