|
|
Post by WECON Technical support on Sept 29, 2015 13:12:10 GMT
|
|
|
|
Post by plcontrol on Mar 26, 2016 12:16:14 GMT
How to enter a constant floating point value on floating instructions? For example, dividing variable floating D100 by a constant floating K ---[DEDIV D100 K0.005 D102] , but in this example K0.005 is incorrect entry. How to write correctly??
|
|
|
|
Post by WECON Support on Mar 28, 2016 4:14:42 GMT
How to enter a constant floating point value on floating instructions? For example, dividing variable floating D100 by a constant floating K ---[DEDIV D100 K0.005 D102] , but in this example K0.005 is incorrect entry. How to write correctly?? Dear Sir, Please use the following command, [DEMUL D0 K200 D2]. |
|
|
|
Post by plcontrol on Mar 28, 2016 14:14:56 GMT
It will be better [DEMUL K1 K200 D2] and then D2 instead of K0.005, but it is the indirect solution if the problem. In the manual is a description of the parameter E for floating-point constants. Which features are E parameter?
|
|
|
|
Post by WECON Support on Mar 30, 2016 7:02:42 GMT
It will be better [DEMUL K1 K200 D2] and then D2 instead of K0.005, but it is the indirect solution if the problem. In the manual is a description of the parameter E for floating-point constants. Which features are E parameter?
I am so sorry, I didn't know which E you mentioned, would you please show me by picture or more detailed about it, so that I could tell you the result. Thank you in advanced! |
|
|
|
Post by plcontrol on Mar 31, 2016 9:01:29 GMT
HELP Manual for the PLC Editor. Section 3.9 - Constant K, H, E . There is a description
"Constant E
[E] is the representation of a 32-bit floating point. It is used to set the values in the application command operand"
K is 10 decimal integer constant, H is 16 decimal integer constant. Where to use E constant?
|
|
|
|
Post by WECON Support on Apr 6, 2016 0:41:48 GMT
Dear Paul,
It is our mistake.The PLC program can't support constant E.We had modifyed the Help in next version.
|
|
rawan
Junior Member
hi i need to connect plc with ASCON 352 by modbus RTU ; i have problem can you help me !!
Posts: 9
|
Post by rawan on May 23, 2019 7:22:05 GMT
what about instruction DASIN /DACOS/DATAN ..did it work becouse i have tried it but it give me an error ?
|
|
|
|
Post by WECON Support on Nov 18, 2019 2:14:09 GMT
what about instruction DASIN /DACOS/DATAN ..did it work becouse i have tried it but it give me an error ? hello, those three instructions only are available on LX3VP and advanced series. |
|
rawan
Junior Member
hi i need to connect plc with ASCON 352 by modbus RTU ; i have problem can you help me !!
Posts: 9
|
Post by rawan on Feb 29, 2020 7:52:42 GMT
what about instruction DASIN /DACOS/DATAN ..did it work becouse i have tried it but it give me an error ? hello, those three instructions only are available on LX3VP and advanced series. ok , i know but it not work with me with lx3vp . can you give me demo ? |
|
|
|
Post by giito14 on Mar 29, 2023 1:01:10 GMT
Hi, I put the instruction DMOV D64 D232, but D64 change to another value, not that it has before, D64 D65 and D232 D233 are free to almacenate Attachments:
|
|
