|
Post by fromitaly on Dec 5, 2016 8:41:29 GMT
Good morning, a customer bought a PI8150 and must be connected to a Siemens S7-300 PLC via an MPI converter 6ES7 972-0CA11-0XA0.
The customer says it is unable to communicate, any of you have experience in this type of communication?
Greetings
|
|
|
Post by plcontrol on Dec 5, 2016 10:39:20 GMT
PI and Levi series has built a hardware Siemens MPI , so doesn't need an external converter 6ES7 972-0CA11-0XA0. Only RS485 3-wires HMI-PLC . I'm not sure if PI8150 the same.
|
|
|
Post by fromitaly on Dec 5, 2016 10:57:42 GMT
In PIstudio it is specified that there is S7-300 protocol, but with the PC adapter .
In the COMMUNICATION DEVICE page you can read --> Siemens S7-300 (with PC Adapter )
Thanks anyway
|
|
|
Post by WECON Technical support on Dec 7, 2016 2:00:29 GMT
|
|
|
Post by ahmad0110 on Dec 19, 2022 13:29:52 GMT
Please resend the video link
|
|