|
Post by kosmogon on Feb 8, 2017 7:28:04 GMT
Hello!
I have LEVI 8708-CE HMI, but I don't have any idea what SCADA application could I use to communicate with LX3V PLC. Can you advise me some application?
|
|
|
Post by WECON Technical support on Feb 8, 2017 9:17:26 GMT
Dear kosmogon, PI8708-CE is wince HMI.So it can not support to connect LX3V PLC.Maybe you buy wrong HMI.Could you tell me where you buy PI8708 HMI?
|
|
|
Post by kosmogon on Feb 8, 2017 11:18:36 GMT
I bought it directly form WECON. If it isn't for LX3V PLC, then what is purpose of it?
|
|
|
Post by WECON Technical support on Feb 9, 2017 1:18:31 GMT
I bought it directly form WECON. If it isn't for LX3V PLC, then what is purpose of it? Do you find a paper(barcode paper) in the back of HMI?Please take a photo of paper for me. PI8708-CE is a Wince system HMI.If you want to program wince application.You must be a advanced wince engineer.I show the barcode and wince started screen to you.Please take two photo to me,just like below.
|
|
|
Post by kosmogon on Feb 9, 2017 9:37:28 GMT
Here are photos you asked for. Attachments:
|
|
|
Post by WECON Technical support on Feb 14, 2017 6:00:50 GMT
I saw your photo of HMI.Your HMI is wince system HMI.So this HMI can not support to connect LX3V PLC. If you are not a advanced wince enginer.Why do you buy wince system HMI?We do not provide wince HMI program for customer.So user must be a advanced wince engineer.
If you want to connect wecon PLC with HMI,HMI must install PI scada system.
|
|