|
Post by WECON Technical support on Apr 25, 2017 7:29:38 GMT
Please refer to the product catalog link below www.we-con.com.cn/Downloads/catalog/Wecon%20products%20catalog.pdf*4 channels 200k pulse ou
if you buy LX3VP-MT-4H PLC.PLC can support 4 *200KHZ hight speed pulse output.But LX3V-4H PLC only can suppport Y0--Y1 max 200KHZ and Y2--Y3 max 100KHZ.Y0+Y1+Y2+Y3 can not more than 400KHZ. *64K Ladder program capacity
LX3VP PLC can support 64K program steps memory.LX3V PLC only support 16K. *N:N PLC interconnection, Maximum 8 devices
LX3VP PLC can support N:N protocol.One main PLC to connect mutil PLC(max total 8*PLC) LX3V can not support N:N protocol.If user want to use N:N in LX3V PLC.User need to add LX3V-485 BD board in every LX3V PLC. *T50-T191: 1 ms non-accumulated timerLX3VP PLC support more Timers.T50-T191: 1 ms non-accumulated timer
|
|
vetal
New Member
Posts: 1
|
Post by vetal on Nov 11, 2019 15:06:12 GMT
Hi! I have PLC LX3V-0806MR-A2 and board LX3VP-ETH-BD.When connecting, blink PWR and Comm. What am I doing wrong? thank
|
|
|
Post by gavra on Nov 12, 2019 8:06:11 GMT
Hello,
Ask Wecon support Administrator, I am not sure, but I think not all BD boards can work on all models PLC-s.
I think Ethernet Board could only work with LX3VP model.
Bye
|
|
|
Post by WECON Support on Nov 18, 2019 2:32:52 GMT
Hello, Ask Wecon support Administrator, I am not sure, but I think not all BD boards can work on all models PLC-s. I think Ethernet Board could only work with LX3VP model. Bye Yes, you are right, LX3VP-ETH-BD is only work with LX3VP series PLC
|
|
|
Post by WECON Support on Nov 18, 2019 2:33:22 GMT
Hi! I have PLC LX3V-0806MR-A2 and board LX3VP-ETH-BD.When connecting, blink PWR and Comm. What am I doing wrong? thank sorry, LX3V series PLC can't support LX3VP-ETH-BD.
|
|