|
|
Post by fromitaly on Jun 10, 2019 13:16:07 GMT
Someone know which is the minimum voltage of the encoder pulse ( X0 - X1 ) ?
4.5 Vdc is enough?
Regards
Maurizio Di Maio
|
|
|
|
Post by WECON Support on Jun 17, 2019 2:36:04 GMT
Someone know which is the minimum voltage of the encoder pulse ( X0 - X1 ) ? 4.5 Vdc is enough? Regards Maurizio Di Maio Hello, 4.5VDC can't trigger X input, it will keep off all the time. |
|
|
|
Post by gavra on Aug 4, 2019 8:22:53 GMT
Hello,
How much current in mA on 24 VDC is enough to trigger encoder inputs?
Bye
|
|
|
|
Post by WECON Support on Aug 6, 2019 2:53:19 GMT
Hello, How much current in mA on 24 VDC is enough to trigger encoder inputs? Bye hello, Usually two-wire NPN type encoders are connected to COM and X, and S/S is connected to 24V. If the voltage between COM and X is >16V (or the voltage between S/S and X is <8V), X is not triggered. If the voltage between COM and X is <8V (or >16V between S/S and X), X is triggered. |
|
|
|
Post by gavra on Aug 8, 2019 21:44:31 GMT
Solved,
7mA X0 and X1,
5mA other inputs.
Bye
|
|
|
|
Post by WECON Support on Aug 12, 2019 2:10:46 GMT
Solved, 7mA X0 and X1, 5mA other inputs. Bye Thanks for your share information |
|
