Reply

no communication S7-1200 ethernet - HMI Levi102A-N

« Prev
1
Next »

remo New Member Posts: 4	no communication S7-1200 ethernet - HMI Levi102A-N Dec 3, 2019 1:18:05 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by remo on Dec 3, 2019 1:18:05 GMT Hello friends, I have such a problem. I've tried different settings (IP, timeout etc.). HMI Levi102A-N, PLC Siemens S7-1200 1212C, Firmware 4,0, Ethernet.

fromitaly God Posts: 198	no communication S7-1200 ethernet - HMI Levi102A-N Dec 3, 2019 3:36:21 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by fromitaly on Dec 3, 2019 3:36:21 GMT Description of communicating with Siemens P....pdf (193.19 KB) I have this one Bye

remo New Member Posts: 4	no communication S7-1200 ethernet - HMI Levi102A-N Dec 3, 2019 9:30:28 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by remo on Dec 3, 2019 9:30:28 GMT Thank you, but: 1. Parameters settings is OK 2. In the Tia portal, the "symbolic access only" option is not available in "add new block". 3. The "Offset" parameter is inactive in the Data block.

fromitaly God Posts: 198	no communication S7-1200 ethernet - HMI Levi102A-N Dec 3, 2019 10:17:05 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by fromitaly on Dec 3, 2019 10:17:05 GMT SIEMEMS S7-1200 V4.0.pdf (270.62 KB) I have also this .. but I dont use Siemens plc. Only Wecon Technical Support can help you ( or some colleague who will read this request ) Regards

remo New Member Posts: 4	no communication S7-1200 ethernet - HMI Levi102A-N Dec 3, 2019 11:27:00 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by remo on Dec 3, 2019 11:27:00 GMT I have also applied the "Protection" settings. It also doesn't work :/ Thank you for your help. I will try again in the future or I will start using PLC Wecon Regards